Ninebot G30LE II
The G30LE II is a cheaper, lighter version of the Ninebot G30E II, and the second generation body of the Ninebot G30LE.
It features similar hardware to the Ninebot G30E in most ways but with the following differences:
- Smaller frame
- Smaller Battery (Ninebot NEE1004-M)
- No AC Charging (Must use external charging brick)
It is the second body revision of the Ninebot G30LE, with only minor cosmetic differences from the previous version.
The main page for guides relating to this model is at Ninebot Max Stuff.
Original specs via Segway.
|Dimensions||Unfolded: Approx. 43.7in x 18.6in x 45.1in (1109 × 472 × 1146 mm)|
Folded: Approx. 43.7in x 18.6in x 21.0in (1109 × 472 × 534mm)
|Net Weight||Approx. 38.6lbs (17.5 kg)|
|Rider Weight||66.1 - 220.5lbs (30.0 - 100.0kg)|
|Max Speed||Approx. 15.5 mph (25 km/h)|
|Advertised Range||Approx. 24.9 miles (40 km)|
|Max Slope||Approx. 20%|
|Traversable Terrain||Asphalt/flat pavement; obstacles ≺ 0.4 in (1 cm); gaps ≺ 1.2 in (3 cm)|
|Operating Temperature||14–104°F (-10–40°C)|
|Storage Temperature||-4–122°F (-20–50°C)|
|Charge Time||Approx. 6.5h|
|Battery Voltage||36 VDC|
|Charging Voltage||42 VDC|
|Charging Temperature||32–104°F (0–40°C)|
|Battery Capacity||10200 mAh / 367 Wh|
|Motor Power||350W (Max 750W)|
|Tires||Tubeless tire, Material: Natural carbon-black synthetic rubber, 60/70-6.5. Straight nozzle|
Custom Firmware (CFW) Support
ScooterHacking.org currently has support for the first gen ESC of this model in their CFW Generator available at max.cfw.sh.
For more info and help identifying which ESC you might have visit Ninebot Max ESC Generations.
Once Converted using the guides above, CFW can be generated and flashed using the guides below:
CFW usually refers to custom firmware for the ESC, though there are some CFW versions for BLE and BMS.
ScooterHacking also supports this model with their SHFW.