Template:Ninebot ESX Reassemble Internals

Revision as of 01:57, 25 August 2023 by Joeybab3 (talk | contribs) (Created page with "Start by placing the plastic battery-ESC clip into the battery. Thread the dashboard cable through the power cable on the battery and then plug in the data line, then the power cable and feed the loose dashboard cable through until tight. Press firmly to reinstall the dashboard cable into the channel. Clip the ESC to the battery.")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Start by placing the plastic battery-ESC clip into the battery.

Thread the dashboard cable through the power cable on the battery and then plug in the data line, then the power cable and feed the loose dashboard cable through until tight.

Press firmly to reinstall the dashboard cable into the channel.

Clip the ESC to the battery.

Retrieved from "https://joeybabcock.me/wiki/index.php?title=Template:Ninebot_ESX_Reassemble_Internals&oldid=2038"