Administrators, Swags, Bureaucrats, Administrators
2,823
edits
No edit summary |
No edit summary |
||
(One intermediate revision by the same user not shown) | |||
Line 1: | Line 1: | ||
In the case of a bricked ESC/Controller/Control Board, STLinking can save the controller from needing to be replaced | In the case of a bricked ESC/Controller/Control Board, STLinking can sometimes save the controller from needing to be replaced. | ||
{{ STLink Materials List }} | {{ STLink Materials List }} | ||
Line 5: | Line 5: | ||
For the Ninebot ESX Series/[[Ninebot SNSC 1.0|SNSC 1.0]], use the guide at: [[STLink Ninebot ESX ESC]]. | For the Ninebot ESX Series/[[Ninebot SNSC 1.0|SNSC 1.0]], use the guide at: [[STLink Ninebot ESX ESC]]. | ||
This guide is for the Global G30 Gen 1 ESC with 1 | This guide is for the Global G30 Gen 1 ESC with 1 capacitor. It is the board revision v1.0. | ||
==Identify Which ESC Generation You Have== | ==Identify Which ESC Generation You Have== | ||
Line 19: | Line 19: | ||
</ul></div> | </ul></div> | ||
Click the image above to | Click the image above to see the guide corresponding to your model. | ||
==Gen 1== | ==Gen 1== | ||
Line 37: | Line 37: | ||
Carefully unplug each of the connectors. | Carefully unplug each of the connectors. | ||
You may need to scrape more rubber potting compound away from some of the connectors | You may need to scrape more rubber potting compound away from some of the connectors to unplug them. | ||
====Accessing The Pins==== | ====Accessing The Pins==== | ||
Line 74: | Line 74: | ||
Remove the STLink and plug back in the ESC and use [[ScooterHacking Utility]] to check that your version number is now 1.2.6. | Remove the STLink and plug back in the ESC and use [[ScooterHacking Utility]] to check that your version number is now 1.2.6. | ||
[[Category: Scooters]][[Category: Ninebot]][[Category: Max]][[Category: STLink]] | [[Category: Scooters]][[Category: Ninebot]][[Category: Max]][[Category: STLink]] |