Ninebot SNSC 2.1
The SNSC 2.1 appears to be the same as the Ninebot SNSC 2.0 or Ninebot Max.
The SNSC 2.0/2.1 are the rental/sharing versions of the Ninebot Max/G30.
This model is succeeded by the Ninebot SNSC 2.2.
Original specs via Segway.
|Dimensions||~45.9 x 18.6 x 47.4 in (1167 x 423 x 1203 mm)|
|Net Weight||Approx. 41.2 lbs (18.7 kg)|
|Rider Weight||66.1-220.5 lbs (30.0-100.0 kg)|
|Max Speed||Approx. 18.6 mph (30 km/h)|
|Advertised Range||Approx. 40.5 miles (60 km)|
|Max Slope||Approx. 20%|
|Traversable Terrain||Asphalt/flat pavement; obstacles ≺ 0.4 in (1 cm); gaps ≺ 1.2 in (3 cm)|
|Operating Temperature||14–104°F (-10–40°C)|
|Storage Temperature||-4–122°F (-20–50°C)|
|Charge Time||Approx. 6h|
|Battery Voltage||36 VDC|
|Charging Voltage||42 VDC|
|Charging Temperature||32–104°F (0–40°C)|
|Battery Capacity||15300 mAh / 551 Wh|
|Motor Power||350W (Max 750W)|
|Internal Charger Power||121W|
|Tires||Tubeless tire, Material: Natural carbon-black synthetic rubber, 60/70-6.5. Straight nozzle|
This series has the same board layout as the retail G30 and so it can be STLinked to give it retail functionality.
The following links are also valid for this series:
Custom Firmware (CFW) Support
ScooterHacking.org currently has support for the first gen ESC of this model in their CFW Generator available at max.cfw.sh.
For more info and help identifying which ESC you might have visit Ninebot Max ESC Generations.
Once converted, CFW can be generated and flashed using the guides below:
CFW usually refers to custom firmware for the ESC or DRV, though there are some CFW versions for BLE and BMS.
ScooterHacking also supports this model with their SHFW.
Helbiz SNSC 2.1: N4LQ
Voi SNSC 2.1: C7S0