Ninebot SNSC 1.1: Difference between revisions

Ninebot SNSC 1.1 (view source)

71 bytes added , 2 September 2023

2,822

edits

@@ Line 3: / Line 3: @@
 It is the rental version, most similar to the Ninebot ESX series.
-There is not any known differences between the '''SNSC 1.1''' and [[Ninebot SNSC 1.0|SNSC 1.0]].
+There are not any known differences between the '''SNSC 1.1''' and [[Ninebot SNSC 1.0|SNSC 1.0]], other than that the 1.1 often did not come with an external battery from the factory.
+[[File:NinebotSNSC1.0.jpg|thumb|400px|center|The Ninebot SNSC 1.0 via Segway[https://static.segway.com/pub/media/catalog/product/cache/92222f9d2af9be9f0c7a6d1d79f6b6e0/k/s/ks1-p3_1_1.jpg].]]
 ==Specs==
@@ Line 20: / Line 22: @@
 |-
 |Max Speed
-|Approx. 18.6 mph (30 km/h)
+|Approx. 15 mph (25 km/h)
 |-
 |Advertised Range
-|Approx. 28.0 miles (45 km)
+|Approx. 15.0 miles (25 km)
 |-
 |Max Slope
@@ Line 41: / Line 43: @@
 |-
 |Charge Time
-|Approx. 7h
+|Approx. 4h
 |-
 |Battery Voltage
@@ Line 53: / Line 55: @@
 |-
 |Battery Capacity
-|10400 mAh 374 Wh <br/> (via 2 batteries at 5100mAh/172Wh)
+|5100mAh / 172Wh
 |-
 |Motor Power
@@ Line 67: / Line 69: @@
 ==Modding==
-This model has custom firmware support from [https://scooterhacking.org/ ScooterHacking].
+{{ESX-like CFW Support}}
-The Custom Firmware Generator can be found [https://esx.cfw.sh/ here].
-ScooterHacking's [[SHFW]] also supports this model.
+==Serial Prefix/Region==
 [[Category: Scooters]][[Category: Ninebot]]