Ninebot NEE1006-M1
The Ninebot NEE1006-M1 is the smaller of the two currently offered removable batteries from Ninebot.
It is the removable version of the Ninebot NEE1006-M.
This battery was designed to be the removable equivalent to the batteries used in the SNSC 2.0 and SNSC 2.1.
It can be used in removable battery scooters such as the SNSC 2.2, SNSC 2.3, and SNSC 2.4.
There are other versions of this battery offering more range such as the Ninebot NEE1009-W, Ninebot NFCP3628B, and Ninebot NFAF3618A.
Specs
Original specs via Segway.
| Dimensions | 423mm×130mm×78mm |
| Weight | 6kg |
| Rated Capacity | 15.3Ah |
| Rated Power | 551Wh |
| Battery Voltage | 36 VDC |
| Charging Voltage | 42 VDC |
| Charging Temperature | 32–104°F (0–40°C) |
| Range* | 60km |
| Cells Used | EVE / FAR EAST |
| Cell Size | 18650 |
| Waterproof Rating | IPX7 |
Range*: Max plus, 25 degrees c, windless, 75kg weight, 16km/h measured at a consistent speed.
BMS Firmware
This battery is based on the STM8 family of MCU and is compatible with standard G30 BMS Firmware.
Inside the case is the same PCB layout as the Ninebot NEE1006-M.
Serial Prefixes/Regions
- 6RICV - Ninebot NEE1006-M1