Ninebot Max Error Code 35: Difference between revisions

From Joey's Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 13: Line 13:
==Fix==
==Fix==


To fix it, change the serial number to a different one.
To fix it, change the serial number to a different one using a third party app such as [[Scooterhacking Utility]].


To do that, you can follow the guide at [[Ninebot Max Change Serial number]].
To do that, you can follow the guide at [[Ninebot Max Change Serial number]].


[[Category: Scooters]][[Category: Ninebot]][[Category: Max]][[Category: Error Code]]
[[Category: Scooters]][[Category: Ninebot]][[Category: Max]][[Category: Error Code]]

Revision as of 15:45, 25 May 2022

Error 35 on a Ninebot Max.
"Default Vehicle Serial Number(S/N), Please replace the Master Control Board"

If your Ninebot Max is beeping or has a red wrench icon and flashes this code, read below.

If you clicked the wrong error code, go back to the Error Code Index.

Previous Error Code: Ninebot Max Error Code 34 - Next Error Code: Ninebot Max Error Code 36

Cause

This error is caused by the ESC having the default serial number of N4GEA1601C0001.

This can happen for any number of reasons but usually happens when flashing a firmware file with the serial number included.

Fix

To fix it, change the serial number to a different one using a third party app such as Scooterhacking Utility.

To do that, you can follow the guide at Ninebot Max Change Serial number.