Ninebot Max Error Code 27: Difference between revisions
No edit summary Tags: Mobile edit Mobile web edit |
No edit summary |
||
| Line 2: | Line 2: | ||
"Control Board Password Error, Please replace the Control Board" | "Control Board Password Error, Please replace the Control Board" | ||
{{Ninebot Max Error Code SEO}} | |||
==Cause== | ==Cause== | ||
Revision as of 20:41, 18 November 2021
"Control Board Password Error, Please replace the Control Board"
If your Ninebot Max is beeping or has a red wrench icon and flashes this code, read below.
If you clicked the wrong error code, go back to the Error Code Index.
Expression error: Unrecognized punctuation character "{".Expression error: Unrecognized punctuation character "{".
Cause
Error 27 occurs when rental vehicles are not properly STLinked or an incomplete firmware dump is used.
It can also be caused by using an old serial change method.
This error is the same across the Ninebot SNSC 1.0, SNSC 1.1, ES1, ES2, ES3, ES4, Ninebot G30/Max, G30P, G30D, G30E, and any other Ninebot G30 series scooter.
Fix
To temporarily fix error 27, hold down the brake and throttle on boot up and release once it beeps.
Changing the serial number twice using a newer dAuth supported serial change method.
Ninebot IAP, Ninebot-Flasher, and a ScooterHacking Utility all support this.
If that doesn't, flashing a CFW using cfw.max.sh with error suppression 1 or more enabled will also solve the problem.