Ninebot Max G30LP

(Redirected from Ninebot G30LP)

The G30LP is a cheaper, lighter version of the Ninebot G30P.

It features similar hardware to the G30P in most ways but with the following differences:

  • Smaller frame
  • Smaller Battery
  • Lighter
  • No AC Charging (Must use external charging brick)
The Ninebot G30LP via Segway[1].

The main page for guides relating to this model is at Ninebot Max Stuff.


Original specs via Segway.

Ninebot G30LP
Dimensions Unfolded: Approx. 43.7in x 18.6in x 45.1in (1109 × 472 × 1146 mm)
Folded: Approx. 43.7in x 18.6in x 21.0in (1109 × 472 × 534mm)
Net Weight Approx. 38.6lbs (17.5 kg)
Rider Weight 66.1 - 220.5lbs (30.0 - 100.0kg)
Max Speed Approx. 18.6 mph (30 km/h)
Advertised Range Approx. 24.9 miles (40 km)
Max Slope Approx. 20%
Traversable Terrain Asphalt/flat pavement; obstacles ≺ 0.4 in (1 cm); gaps ≺ 1.2 in (3 cm)
Operating Temperature 14–104°F (-10–40°C)
Storage Temperature
IP Rating IPX5
Charge Time Approx. 6.5h
Battery Voltage 36 VDC
Charging Voltage 42 VDC
Charging Temperature 32–104°F (0–40°C)
Battery Capacity 10200 mAh / 367 Wh
Motor Power 350W (Max 750W)
Charger Power 71W
Charger Current 1.7A
Shocks None
Tires Tubeless tire, Material: Natural carbon-black synthetic rubber, 60/70-6.5. Straight nozzle

Vehicle Images

These images were taken of a late 2021 version of the G30LP.

There may be minor cosmetic differences between these and currently sold or past sold models.


Images of the bottom of the vehicle.

    The bottom cover of the Ninebot G30LP.
    The bottom cover removed, exposing the battery and ESC.


Images of the left or right side of the vehicle.

    The FCC Label for the Ninebot G30LP.
    The charging port. Notice there is no ability to charge with AC unlike with the G30P.
    The Serial Number Label for the Ninebot G30LP.


    The topdown view of the handlebar on the Ninebot G30LP.

Custom Firmware (CFW) Support currently has support for the first gen ESC of this model in their CFW Generator available at

For more info and help identifying which ESC you might have visit Ninebot Max ESC Generations.

Once converted, CFW can be generated and flashed using the guides below:

CFW usually refers to custom firmware for the ESC or DRV, though there are some CFW versions for BLE and BMS.

ScooterHacking also supports all generations of this model with their SHFW.