Ninebot G30E

The G30E is the European version of the Ninebot G30.

It is much more durable and features a higher capacity single battery, as well as air tires and ac/dc charging support.

This version was succeeded by the Ninebot G30E II.

The Ninebot G30E via Segway[1].

The main page for guides relating to this model is at Ninebot Max Stuff.

The G30E is the german version of the max. Other versions include the G30P/G30 and G30D.

The "E" signifies that this is the G30 version conforming to European safety regulations for speed and design.

Specifications

Original specs via Segway.

Ninebot G30E
Dimensions	Unfolded: ~45.9 x 18.6 x 47.4 in (1167 x 423 x 1203 mm) Folded: ~45.9 x 18.6 x 21.0 in (1167 x 423 x 534 mm)
Net Weight	Approx. 41.2 lbs (18.7 kg)
Rider Weight	66.1-220.5 lbs (30.0-100.0 kg)
Max Speed	Approx. 15.5 mph (25 km/h)
Advertised Range	Approx. 40.5 miles (65 km)
Max Slope	Approx. 20%
Traversable Terrain	Asphalt/flat pavement; obstacles ≺ 0.4 in (1 cm); gaps ≺ 1.2 in (3 cm)
Operating Temperature	14–104°F (-10–40°C)
Storage Temperature
IP Rating	IPX5
Charge Time	Approx. 6h
Battery Voltage	36 VDC
Charging Voltage	42 VDC
Charging Temperature	32–104°F (0–40°C)
Battery Capacity	15300 mAh / 551 Wh
Motor Power	350W (Max 750W)
Internal Charger Power	121W
Internal Current	2.9A
Shocks	None
Tires	Tubeless tire, Material: Natural carbon-black synthetic rubber, 60/70-6.5. Straight nozzle

ScooterHacking.org currently has support for the first gen ESC of this model in their CFW Generator available at max.cfw.sh.

For more info and help identifying which ESC you might have visit Ninebot Max ESC Generations.

Once converted, CFW can be generated and flashed using the guides below:

CFW usually refers to custom firmware for the ESC or DRV, though there are some CFW versions for BLE and BMS.

ScooterHacking also supports this model with their SHFW.

Here is a list of all Ninebot G30/Max(G30P, G30D, G30E) / SNSC 2.0 error codes and their causes/solutions: