Administrators, Swags, Bureaucrats, Administrators
2,822
edits
Ninebot ESX Error Code A0: Difference between revisions
→Cause
(Created page with "Error "A0" is not actually an error. This page documents Error A0 for the Ninebot ES1, ES2, ES3, and ES4, as well as the rental models SNSC 1.0, and SNSC 1.1. For the Max G3...") |
(→Cause) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
Error "A0" is not actually an error. | Error "'''A0'''" is not actually an error. | ||
This page documents Error A0 for the Ninebot ES1, ES2, ES3, and ES4, as well as the rental models SNSC 1.0, and SNSC 1.1. | This page documents '''Error A0''' for the Ninebot ES1, ES2, ES3, and ES4, as well as the rental models SNSC 1.0, and SNSC 1.1. | ||
For the Max G30/SNSC 2.0+, see [[Ninebot Max Error Code A0]]. | For the Max G30/SNSC 2.0+, see [[Ninebot Max Error Code A0]]. | ||
| Line 9: | Line 9: | ||
==Cause== | ==Cause== | ||
If your scooter displays "A0" and isn't charging anymore it's because your scooter is fully charged. | If your scooter displays "'''A0'''" and isn't charging anymore it's because your scooter is fully charged. | ||
The "A" is the equivalent of "10" in hexadecimal, so you have 10 0 or 100% charged. | The "'''A'''" is the equivalent of "10" in hexadecimal, so you have 10 0 or 100% charged. | ||
You likely installed firmware on your scooter with "show battery percentage while idle" enabled. | You likely installed firmware on your scooter with "show battery percentage while idle" enabled. | ||