Ninebot ESX Error Code 38

From Joey's Wiki
Revision as of 19:05, 4 January 2023 by Joeybab3 (talk | contribs) (→‎Fix)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Error 38 on a Ninebot ESX.
"Battery charging protection error. Please check if the extra battery is loose or check the error code again before restarting the vehicle."

If your Ninebot ESX(ES1, ES2, ES3, or ES4) or SNSC (1.0 or 1.1) is beeping or has a red wrench icon and flashes this code, read below.

If you clicked the wrong error code, go back to the Error Code Index.

Previous Error Code: Ninebot ESX Error Code 37 - Next Error Code: Ninebot ESX Error Code 39

Cause

This error is often caused when a fast charger is used on an ESX scooter.

If the charging current is too high it will throw this error.

Fix

Use the stock charger, make sure not to exceed the rated charging current.

Retrieved from "https://joeybabcock.me/wiki/index.php?title=Ninebot_ESX_Error_Code_38&oldid=1093"