Ninebot ESX Error Code 31

File:NinebotESXError31.png

Error 31 on a Ninebot ESX.

"Program Skip Error, Please check the Control Board"

If your Ninebot ESX(ES1, ES2, ES3, or ES4) or SNSC (1.0 or 1.1) is beeping or has a red wrench icon and flashes this code, read below.

If you clicked the wrong error code, go back to the Error Code Index.

Previous Error Code: Ninebot ESX Error Code 30 - Next Error Code: Ninebot ESX Error Code 32