Ninebot ESX Error Code 29

Revision as of 22:49, 1 December 2021 by Joeybab3 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

If your Ninebot ESX(ES1, ES2, ES3, or ES4) or SNSC (1.0 or 1.1) is beeping or has a red wrench icon and flashes this code, read below.

File:NinebotESXError29.png
Error 29 on a Ninebot ESX.
"Motor MOS driver Lower Bridge Error, Please check the Control Board"

If you clicked the wrong error code, go back to the Error Code Index.

Previous Error Code: Ninebot ESX Error Code 28 - Next Error Code: Ninebot ESX Error Code 30

Cause

Fix

An error 29 will likely require replacing the control board.