Ninebot ESX Error Code 28

From Joey's Wiki
Revision as of 22:49, 1 December 2021 by Joeybab3 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
File:NinebotESXError28.png
Error 28 on a Ninebot ESX.
"Motor MOS driver upper Bridge is short circuited, Please check the Control Board"

If your Ninebot ESX(ES1, ES2, ES3, or ES4) or SNSC (1.0 or 1.1) is beeping or has a red wrench icon and flashes this code, read below.

If you clicked the wrong error code, go back to the Error Code Index.

Previous Error Code: Ninebot ESX Error Code 27 - Next Error Code: Ninebot ESX Error Code 29

Cause

Fix