Ninebot ESX Error Code 19

If your Ninebot ESX(ES1, ES2, ES3, or ES4) or SNSC (1.0 or 1.1) is beeping or has a red wrench icon and flashes this code, read below.

Error 19 on a Ninebot ESX.

"Battery Voltage detection is abnormal, Please check the Battery, Control Board and related connections"

If you clicked the wrong error code, go back to the Error Code Index.

Previous Error Code: Ninebot ESX Error Code 18 - Next Error Code: Ninebot ESX Error Code 20

Cause

This error shows when the ESC detects a battery voltage outside of expected conditions.

Often error 19 is caused by a battery that has sat for a while and run out of charge but then has had its BMS rebooted by plugging it back in with a charged battery.

Fix

It can be fixed by keeping the battery charging with an external/internal that is partially charged which will allow the charger to keep passing current to the batteries without shutting off.