Ninebot ESX Error Code 18

From Joey's Wiki
Revision as of 22:48, 1 December 2021 by Joeybab3 (talk | contribs)
Jump to navigation Jump to search
Error 18 on a Ninebot ESX.
"Wheel Hub Motor Hall is abnormal, Please check the Motor, Control Board & related connections"

If your Ninebot ESX(ES1, ES2, ES3, or ES4) or SNSC (1.0 or 1.1) is beeping or has a red wrench icon and flashes this code, read below.

If you clicked the wrong error code, go back to the Error Code Index.

Previous Error Code: Ninebot ESX Error Code 17 - Next Error Code: Ninebot ESX Error Code 19

Cause

Fix

Retrieved from "https://joeybabcock.me/wiki/index.php?title=Ninebot_ESX_Error_Code_18&oldid=376"