Ninebot ESX Error Code 13

Revision as of 22:47, 1 December 2021 by Joeybab3 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

If your Ninebot ESX(ES1, ES2, ES3, or ES4) or SNSC (1.0 or 1.1) is beeping or has a red wrench icon and flashes this code, read below.

File:NinebotESXError13.png
Error 13 on a Ninebot ESX.
"Wheel Hub Motor C Phase Current sampling is Abnormal, please check the main Control Board"

If you clicked the wrong error code, go back to the Error Code Index.

Previous Error Code: Ninebot ESX Error Code 12 - Next Error Code: Ninebot ESX Error Code 14

Cause

The cause of these 3 errors (11, 12, and 13) is currently unknown.

Fix

As the cause is unknown, the only currently known way to solve error 11 is to replace the control board.