Difference between revisions of "Ninebot ES3"

From Joey's Wiki
Jump to navigation Jump to search
Line 81: Line 81:

*[[File: NinebotKickscooterSeriesManual.pdf]]
*[[File: NinebotKickscooterSeriesManual.pdf]]
This model has custom firmware support from [https://scooterhacking.org/ ScooterHacking].
The Custom Firmware Generator can be found [https://esx.cfw.sh/ here].
ScooterHacking's [[SHFW]] also supports this model.

[[Category: Scooters]][[Category: Ninebot]]
[[Category: Scooters]][[Category: Ninebot]]

Revision as of 22:30, 23 May 2022

The ES3 is a budget scooter made by Ninebot.

It is the first version of the "KickScooter" series also known as the KS or ES(Electric Scooter) series.

Attaching a battery to an ES1 makes it a Ninebot ES3.

This scooter was superseded by the Ninebot ES4.

The Ninebot ES3 via Segway[1].

Costco had its own version of the ES3 called the "ES3 Plus".


Original specs via Segway.

Ninebot ES3
Dimensions Unfolded: Approx. 40 × 17 × 45 in (102 × 43 × 113 cm)
Folded: Approx. 45 × 17 × 16 in (113 × 43 × 40 cm)
Net Weight Approx. 30.9 lbs (14.0 kg)
Rider Weight 55–220 lbs (25–100 kg)
Max Speed Approx. 18.6 mph (30 km/h)
Advertised Range Approx. 28.0 miles (45 km)
Max Slope Approx. 15%
Traversable Terrain Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm)
Operating Temperature 14–104°F (-10–40°C)
Storage Temperature
IP Rating IP54
Charge Time Approx. 7h
Battery Voltage 36 VDC
Charging Voltage 42 VDC
Charging Temperature 32–104°F (0–40°C)
Battery Capacity 10400 mAh / 374 Wh
Motor Power 300W
Charger Power 71W
Charger Current 1.7A
Shocks Front and Rear



This model has custom firmware support from ScooterHacking.

The Custom Firmware Generator can be found here.

ScooterHacking's SHFW also supports this model.