Difference between revisions of "Ninebot ES2"

From Joey's Wiki
Jump to navigation Jump to search
Line 80: Line 80:
*[[File: NinebotKickscooterSeriesManual.pdf]]
*[[File: NinebotKickscooterSeriesManual.pdf]]


This model has custom firmware support from [https://scooterhacking.org/ ScooterHacking].
This model has custom firmware support from [https://scooterhacking.org/ ScooterHacking].

Revision as of 22:30, 23 May 2022

The ES2 is a budget scooter made by Ninebot.

It is the second of the "KickScooter" series also known as the KS or ES(Electric Scooter) series.

Attaching a battery to an ES2 makes it into a Ninebot ES4.

This scooter was superseded by the Ninebot G30P.

The Ninebot ES2 via Segway[1].


Original specs via Segway.

Ninebot ES2
Dimensions Unfolded: Approx. 40 × 17 × 45 in (102 × 43 × 113 cm)
Folded: Approx. 45 × 17 × 16 in (113 × 43 × 40 cm)
Net Weight Approx. 27.6 lbs (12.5 kg)
Rider Weight 55–220 lbs (25–100 kg)
Max Speed Approx. 15.5 mph (25 km/h)
Advertised Range Approx. 15.5 miles (25 km)
Max Slope Approx. 10%
Traversable Terrain Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm)
Operating Temperature 14–104°F (-10–40°C)
Storage Temperature
IP Rating IP54
Charge Time Approx. 3.5h
Battery Voltage 36 VDC
Charging Voltage 42 VDC
Charging Temperature 32–104°F (0–40°C)
Battery Capacity 5200 mAh / 187 Wh
Motor Power 300W
Charger Power 71W
Charger Current 1.7A
Shocks Front and Rear



This model has custom firmware support from ScooterHacking.

The Custom Firmware Generator can be found here.

ScooterHacking's SHFW also supports this model.