The ES1 is a budget scooter made by Ninebot.
It is the first of the "KickScooter" series also known as the KS or ES(Electric Scooter) series.
Attaching a battery to an ES1 makes it into a Ninebot ES3.
This scooter was superseded by the Ninebot ES2.
The main page for guides relating to this model is at Ninebot ESX Stuff.
Original specs via Segway.
|Dimensions||Unfolded: Approx. 40 × 17 × 45 in (102 × 43 × 113 cm)|
Folded: Approx. 45 × 17 × 16 in (113 × 43 × 40 cm)
|Net Weight||Approx. 24.9 lbs (11.3 kg)|
|Rider Weight||55–220 lbs (25–100 kg)|
|Max Speed||Approx. 12.4 mph (20 km/h)|
|Advertised Range||Approx. 15.5 miles (20 km)|
|Max Slope||Approx. 10%|
|Traversable Terrain||Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm)|
|Operating Temperature||14–104°F (-10–40°C)|
|Charge Time||Approx. 3.5h|
|Battery Voltage||36 VDC|
|Charging Voltage||42 VDC|
|Charging Temperature||32–104°F (0–40°C)|
|Battery Capacity||5200 mAh / 187 Wh|
This model has custom firmware support from ScooterHacking.
The Custom Firmware Generator can be found here.
ScooterHacking's SHFW also supports this model.