Ninebot ES1: Difference between revisions

From Joey's Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 79: Line 79:


*[[File: NinebotKickscooterSeriesManual.pdf]]
*[[File: NinebotKickscooterSeriesManual.pdf]]
==Modding===
This model has custom firmware support from [https://scooterhacking.org/ ScooterHacking].
The Custom Firmware Generator can be found [https://esx.cfw.sh/ here].
ScooterHacking's SHFW also supports this model.


[[Category: Scooters]][[Category: Ninebot]]
[[Category: Scooters]][[Category: Ninebot]]

Revision as of 22:29, 23 May 2022

The ES1 is a budget scooter made by Ninebot.

It is the first of the "KickScooter" series also known as the KS or ES(Electric Scooter) series.

Attaching a battery to an ES1 makes it into a Ninebot ES3.

This scooter was superseded by the Ninebot ES2.

The Ninebot ES1 via Segway[1].

Specs

Original specs via Segway.

Ninebot ES1
Dimensions Unfolded: Approx. 40 × 17 × 45 in (102 × 43 × 113 cm)
Folded: Approx. 45 × 17 × 16 in (113 × 43 × 40 cm)
Net Weight Approx. 24.9 lbs (11.3 kg)
Rider Weight 55–220 lbs (25–100 kg)
Max Speed Approx. 12.4 mph (20 km/h)
Advertised Range Approx. 15.5 miles (20 km)
Max Slope Approx. 10%
Traversable Terrain Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm)
Operating Temperature 14–104°F (-10–40°C)
Storage Temperature
IP Rating IP54
Charge Time Approx. 3.5h
Battery Voltage 36 VDC
Charging Voltage 42 VDC
Charging Temperature 32–104°F (0–40°C)
Battery Capacity 5200 mAh / 187 Wh
Motor Power 250W
Charger Power 71W
Charger Current 1.7A
Shocks Front only

Manuals

Modding=

This model has custom firmware support from ScooterHacking.

The Custom Firmware Generator can be found here.

ScooterHacking's SHFW also supports this model.