Ninebot SNBLK 1.0

From Joey's Wiki
Revision as of 07:15, 30 November 2022 by Joeybab3 (talk | contribs) (Created page with "The SNSC 1.0 BLK was the Lime-specific version of the SNSC 1.0. It featured underglow on most units thumb|512px|center|The Ninebot SNSC 1.0BLK via Segway[https://static.segway.com/pub/media/catalog/product/cache/92222f9d2af9be9f0c7a6d1d79f6b6e0/k/s/ks1-p3_1_1.jpg]. These models did not fold but were otherwise compatible with most ESX hardware. This model was one of the first available SNSC 1.0 units. ==Specs== {| class="wikitable...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The SNSC 1.0 BLK was the Lime-specific version of the SNSC 1.0.

It featured underglow on most units

The Ninebot SNSC 1.0BLK via Segway[1].

These models did not fold but were otherwise compatible with most ESX hardware.

This model was one of the first available SNSC 1.0 units.

Specs

Ninebot SNSC 1.0BLK
Dimensions Approx. 40 × 17 × 45 in (102 × 43 × 113 cm)
Net Weight Approx. 30.9 lbs (14.0 kg)
Rider Weight 55–220 lbs (25–100 kg)
Max Speed Approx. 18.6 mph (30 km/h)
Advertised Range Approx. 28.0 miles (45 km)
Max Slope Approx. 15%
Traversable Terrain Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm)
Operating Temperature 14–104°F (-10–40°C)
Storage Temperature -4–122°F (-20–50°C)
IP Rating IP54
Charge Time Approx. 7h
Battery Voltage 36 VDC
Charging Voltage 42 VDC
Charging Temperature 32–104°F (0–40°C)
Battery Capacity 10400 mAh 374 Wh
Motor Power 800W
Charger Power 71W
Charger Current 1.7A

Modding

This model has custom firmware support from ScooterHacking.

The Custom Firmware Generator can be found here.

ScooterHacking's SHFW also supports this model.