Okai Error Code 14E

From Joey's Wiki
Revision as of 00:18, 31 August 2024 by Joeybab3 (talk | contribs) (Created page with " "Cannot communicate with BMS - check BMS connection, replace BMS or battery" {{Okai Error Code SEO|14}} ==Cause== Error code 14E indicates a problem with the right brake lever control system. This could be due to: * Open circuit: The wire connecting the right brake lever to the ECU might be broken or disconnected. * Short circuit: The right brake signal wire or the power wire might be shorted to ground or to each other. * ECU update failure: The ECU might have faile...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search 
"Cannot communicate with BMS - check BMS connection, replace BMS or battery"

If your Okai-Electisan vehicle is beeping or has a red wrench icon and flashes this code, read below.

If you clicked the wrong error code, go back to the Error Code Index.

Previous Error Code: Okai Error Code 13E - Next Error Code: Okai Error Code 15E

Cause

Error code 14E indicates a problem with the right brake lever control system. This could be due to:

  • Open circuit: The wire connecting the right brake lever to the ECU might be broken or disconnected.
  • Short circuit: The right brake signal wire or the power wire might be shorted to ground or to each other.
  • ECU update failure: The ECU might have failed to update the program correctly, causing a communication error with the brake lever.

Fix

  • Re-send the update command.
  • Change the ECU.
Retrieved from "https://joeybabcock.me/wiki/index.php?title=Okai_Error_Code_14E&oldid=3271"