Template:Ninebot ESX Front Motor Disassembly - Motor Bolts

Revision as of 19:43, 2 July 2023 by Joeybab3 (talk | contribs) (Created page with "The motor bolts require a fair bit of force to remove. Use an 18mm fixed wrench (metric) to remove them. thumb|center|400px|One of the bolts on either side holding the motor in place. Once removed feed enough of the motor cable out to pull the motor away from the fork.")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The motor bolts require a fair bit of force to remove.

Use an 18mm fixed wrench (metric) to remove them.

One of the bolts on either side holding the motor in place.

Once removed feed enough of the motor cable out to pull the motor away from the fork.

Retrieved from "https://joeybabcock.me/wiki/index.php?title=Template:Ninebot_ESX_Front_Motor_Disassembly_-_Motor_Bolts&oldid=1659"