Ninebot SNSC 1.1
The SNSC 1.1 is a budget rental scooter made by Ninebot.
It is the rental version, most similar to the Ninebot ESX series.
There is not any known differences between the SNSC 1.1 and SNSC 1.0.
Specs
Dimensions | Approx. 40 × 17 × 45 in (102 × 43 × 113 cm) |
Net Weight | Approx. 30.9 lbs (14.0 kg) |
Rider Weight | 55–220 lbs (25–100 kg) |
Max Speed | Approx. 18.6 mph (30 km/h) |
Advertised Range | Approx. 28.0 miles (45 km) |
Max Slope | Approx. 15% |
Traversable Terrain | Asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm) |
Operating Temperature | 14–104°F (-10–40°C) |
Storage Temperature | -4–122°F (-20–50°C) |
IP Rating | IP54 |
Charge Time | Approx. 7h |
Battery Voltage | 36 VDC |
Charging Voltage | 42 VDC |
Charging Temperature | 32–104°F (0–40°C) |
Battery Capacity | 10400 mAh 374 Wh (via 2 batteries at 5100mAh/172Wh) |
Motor Power | 300W |
Charger Power | 71W |
Charger Current | 1.7A |
Modding
This model has custom firmware support from ScooterHacking.
The Custom Firmware Generator can be found here.
ScooterHacking's SHFW also supports this model.