Ninebot Max Error Code 19

Error 19 on a Ninebot Max.

"Built-in Battery Voltage detection is abnormal, Please check the Battery, Control Board and related connections"

Read below if your Ninebot Max G30 or G2 is beeping or has a red wrench icon and flashes this code.

If you clicked the wrong error code, return to the Max G30 and G2 Error Code Index.

Previous Error Code: Ninebot Max Error Code 18 - Next Error Code: Ninebot Max Error Code 20

Cause

This error is thrown when the battery believes it's under the correct voltage.

Fix

The battery likely needs to be charged, plug in the charge and see if it stays red or oscillates between green to red or stays solid green.

If it is solid red, nothing more is needed, let it charge.

If it is flashing between green and red, leave it for an hour or so and it should begin normally charging a short while later.

If it stays solid green, your battery may need to be replaced.