Ninebot Max G3

From Joey's Wiki
Revision as of 18:57, 7 January 2025 by Joeybab3 (talk | contribs) (Created page with "The '''Ninebot Max G3''' is an upgraded consumer version of the Ninebot G2. This model features front and rear suspension, and an upgraded TFT full-color display. The '''E''' in the model number signifies that this is the European variation of this scooter. The European variation of this vehicle is the Ninebot Max G3 E, and the German variation is the Ninebot Max G3 D. File:NinebotG3.png|thumb|512px|center|The Ninebot G3 via Segway[https://www.segway.co...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The Ninebot Max G3 is an upgraded consumer version of the Ninebot G2.

This model features front and rear suspension, and an upgraded TFT full-color display.

The E in the model number signifies that this is the European variation of this scooter.

The European variation of this vehicle is the Ninebot Max G3 E, and the German variation is the Ninebot Max G3 D.

File:NinebotG3.png
The Ninebot G3 via Segway[1].

Specifications

Original specs Segway.

Ninebot G3
Dimensions Unfolded: 1218 × 590 × 1299 mm (48 × 23.2 × 51.1 in)
Folded: 1218 × 590 × 592 mm (48 × 23.2 × 23.3 in)
Rider Weight 130kg (285 lbs)
Advertised Range Theoretical Range: 80km
Range at Max. Speed: Up to 65km (40 miles)
Max Slope Approx. 30%
IP Rating IPX6 eKickScooter body and IPX7 battery pack
Battery Capacity 597 Wh
Motor Power 700W (Max 2000W)
Shocks Front double hydraulic suspensions & rear double adjustable hydraulic suspensions
Tires Tubeless Pneumatic self-sealing 279 mm / 11 inch

Custom Firmware (CFW) Support

Given the newness of this vehicle, there is no custom firmware support.

Check back though as this can change.

Serial Prefix/Region