Okai Error Code 11E

From Joey's Wiki
Revision as of 02:18, 10 December 2024 by Joeybab3 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search 
"Signal transmission problem (controller problem)"

If your Okai-Electisan vehicle is beeping or has a red wrench icon and flashes this code, read below.

If you clicked the wrong error code, go back to the Error Code Index.

Previous Error Code: Okai Error Code 10E - Next Error Code: Okai Error Code 12E

Cause

Error code 11E indicates a problem with signal transmission between the ECU (controller) and other scooter components. This could be caused by:

  • Faulty wiring: The wiring connecting the ECU to other components, such as the motor, throttle, or display, could be damaged or broken.
  • Loose connections: One or more of the connectors between the ECU and other components might be loose.
  • Damaged connectors: A connector might be damaged or corroded, preventing a proper connection.
  • ECU malfunction: The ECU itself might be faulty, unable to send or receive signals correctly.

Fix

  • Check wiring: Carefully inspect the wiring connecting the ECU to other components for any signs of damage, breaks, or loose connections.
  • Secure connections: Make sure all the connectors between the ECU and other components are securely connected.
  • Clean or replace connectors: If connectors are corroded or damaged, clean them or replace them.
  • Replace the ECU: If the problem persists, the ECU might be faulty. Consider replacing the ECU.
Retrieved from "https://joeybabcock.me/wiki/index.php?title=Okai_Error_Code_11E&oldid=3597"