Okai Error Code 25E

From Joey's Wiki
Revision as of 00:22, 31 August 2024 by Joeybab3 (talk | contribs) (Created page with " "The ECU heartbeat fault" {{Okai Error Code SEO|25}} ==Cause== Error code 25E indicates that the ECU is not sending out a regular heartbeat signal to the meter. This could be due to: * Faulty ECU: The ECU itself might be malfunctioning, preventing it from sending the heartbeat signal. * Loose connection: The connection between the ECU and the meter might be loose, interrupting the signal. ==Fix== * Check if the connection of the ECU is loose. * Change the ECU. [...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search 
"The ECU heartbeat fault"

If your Okai-Electisan vehicle is beeping or has a red wrench icon and flashes this code, read below.

If you clicked the wrong error code, go back to the Error Code Index.

Previous Error Code: Okai Error Code 24E - Next Error Code: Okai Error Code 26E

Cause

Error code 25E indicates that the ECU is not sending out a regular heartbeat signal to the meter. This could be due to:

  • Faulty ECU: The ECU itself might be malfunctioning, preventing it from sending the heartbeat signal.
  • Loose connection: The connection between the ECU and the meter might be loose, interrupting the signal.

Fix

  • Check if the connection of the ECU is loose.
  • Change the ECU.
Retrieved from "https://joeybabcock.me/wiki/index.php?title=Okai_Error_Code_25E&oldid=3276"