Ninebot Max Error Code 45: Difference between revisions
Jump to navigation
Jump to search
(Created page with "thumb|center|200px|Error 45 on a Ninebot Max. "Unknown" {{Ninebot Max Error Code SEO|45}} ==Cause== This error is likely caused by a Max Pro/Plus (SNSC 2.2+) being flashed with retail firmware. ==Fix== These scooters are not intended to be flashed with retail firmware. Some have reported success with moving the wheel slightly on startup. The error would have to be manually patched out otherwise. Category: ScootersCategory:...") |
No edit summary |
||
| Line 8: | Line 8: | ||
This error is likely caused by a Max Pro/Plus (SNSC 2.2+) being flashed with retail firmware. | This error is likely caused by a Max Pro/Plus (SNSC 2.2+) being flashed with retail firmware. | ||
The following models are not compatible with retail firmware and will likely throw an error 45 if that is attempted: | |||
*[[Ninebot SNSC 2.2]] | |||
*[[Ninebot SNSC 2.2A]] | |||
*[[Ninebot SNSC 2.2B]] | |||
*[[Ninebot SNSC 2.3]] | |||
*[[Ninebot SNSC 2.3.2]] | |||
*[[Ninebot SNSC 2.4]] | |||
==Fix== | ==Fix== | ||
Revision as of 20:32, 29 May 2022
"Unknown"
Read below if your Ninebot Max G30 or G2 is beeping or has a red wrench icon and flashes this code.
If you clicked the wrong error code, return to the Max G30 and G2 Error Code Index.
Previous Error Code: Ninebot Max Error Code 44 - Next Error Code: Ninebot Max Error Code 46
Cause
This error is likely caused by a Max Pro/Plus (SNSC 2.2+) being flashed with retail firmware.
The following models are not compatible with retail firmware and will likely throw an error 45 if that is attempted:
- Ninebot SNSC 2.2
- Ninebot SNSC 2.2A
- Ninebot SNSC 2.2B
- Ninebot SNSC 2.3
- Ninebot SNSC 2.3.2
- Ninebot SNSC 2.4
Fix
These scooters are not intended to be flashed with retail firmware.
Some have reported success with moving the wheel slightly on startup.
The error would have to be manually patched out otherwise.