STLink Ninebot Max G30 Gen 2 ESC: Difference between revisions

Jump to navigation Jump to search
No edit summary
 
Line 37: Line 37:
Carefully unplug each of the connectors.  
Carefully unplug each of the connectors.  


You may need to scrape more rubber potting compounds away from some of the connectors in order to unplug them.
You may need to scrape more rubber potting compounds away from some of the connectors to unplug them.


===Accessing The Pins===
===Accessing The Pins===
Line 79: Line 79:
===Testing===
===Testing===


Remove the STLink and plug back in the ESC and use [[ScooterHacking Utility]] to check that your version number is now [[Ninebot Max DRV 1.6.13|1.6.13]] or [[Ninebot Max DRV 1.7.3|1.7.3]].
Remove the STLink and plug the ESC back in, then use [[ScooterHacking Utility]] to check that your version number is now [[Ninebot Max DRV 1.6.13|1.6.13]] or [[Ninebot Max DRV 1.7.3|1.7.3]].


[[File:NinebotMaxGen2ControllerSuccessfulDowngrade.png|thumb|center|400px|The downgrade was successful as shown here by the version number.]]
[[File:NinebotMaxGen2ControllerSuccessfulDowngrade.png|thumb|center|400px|The downgrade was successful as shown here by the version number.]]
Retrieved from "https://joeybabcock.me/wiki/STLink_Ninebot_Max_G30_Gen_2_ESC"