Ninebot Max Error Code 16: Difference between revisions
(Created page with "thumb|center|200px|Error 16 on a Ninebot Max. "Brake Hall is abnormal, please check the Throttle Switch, Dashboard & related Connections" {{Ninebot Max Error Code SEO|16}} ==Cause== Error 16 is caused when the **right** brake hall sensor is reporting a value outside of the expected range. This can be easily replicated by holding down the **right** brake when starting up the scooter. In the field, this error can be caused by the magn...") |
No edit summary |
||
| Line 7: | Line 7: | ||
==Cause== | ==Cause== | ||
Error 16 is caused when the | Error 16 is caused when the right brake hall sensor is reporting a value outside of the expected range. | ||
This can be easily replicated by holding down the | This can be easily replicated by holding down the right brake when starting up the scooter. | ||
In the field, this error can be caused by the magnet coming dislodged inside the | In the field, this error can be caused by the magnet coming dislodged inside the right brake. | ||
The error can also happen if the 049E hall sensor is blown due to a voltage spike or some other issue. | The error can also happen if the 049E hall sensor is blown due to a voltage spike or some other issue. | ||
| Line 17: | Line 17: | ||
==Fix== | ==Fix== | ||
Check that the | Check that the right brake lever is not stuck by fully pressing it down and then manually pulling it up. | ||
Unscrew the dashboard cover and remove it to confirm that the connector for the | Unscrew the dashboard cover and remove it to confirm that the connector for the right brake is still plugged in firmly. | ||
If that does not solve the issue, you may need to disassemble the | If that does not solve the issue, you may need to disassemble the right brake or buy a new one. | ||
The next thing to check is that the magnets within the | The next thing to check is that the magnets within the right brake are still in the correct place. | ||
The | The right brake will have to be disassembled to access the magnets. | ||
[[Category: Scooters]][[Category: Ninebot]][[Category: Max]][[Category: Error Code]] | [[Category: Scooters]][[Category: Ninebot]][[Category: Max]][[Category: Error Code]] | ||
Latest revision as of 18:02, 10 January 2025
"Brake Hall is abnormal, please check the Throttle Switch, Dashboard & related Connections"
Read below if your Ninebot Max G30 or G2 is beeping or has a red wrench icon and flashes this code.
If you clicked the wrong error code, return to the Max G30 and G2 Error Code Index.
Previous Error Code: Ninebot Max Error Code 15 - Next Error Code: Ninebot Max Error Code 17
Cause
Error 16 is caused when the right brake hall sensor is reporting a value outside of the expected range.
This can be easily replicated by holding down the right brake when starting up the scooter.
In the field, this error can be caused by the magnet coming dislodged inside the right brake.
The error can also happen if the 049E hall sensor is blown due to a voltage spike or some other issue.
Fix
Check that the right brake lever is not stuck by fully pressing it down and then manually pulling it up.
Unscrew the dashboard cover and remove it to confirm that the connector for the right brake is still plugged in firmly.
If that does not solve the issue, you may need to disassemble the right brake or buy a new one.
The next thing to check is that the magnets within the right brake are still in the correct place.
The right brake will have to be disassembled to access the magnets.