Ninebot Max Error Code 16: Difference between revisions
(Created page with "thumb|center|200px|Error 16 on a Ninebot Max. "Brake Hall is abnormal, please check the Throttle Switch, Dashboard & related Connections" {{Ninebot Max Error Code SEO|16}} ==Cause== Error 16 is caused when the **right** brake hall sensor is reporting a value outside of the expected range. This can be easily replicated by holding down the **right** brake when starting up the scooter. In the field, this error can be caused by the magn...") |
(No difference)
|
Revision as of 18:01, 10 January 2025
"Brake Hall is abnormal, please check the Throttle Switch, Dashboard & related Connections"
Read below if your Ninebot Max G30 or G2 is beeping or has a red wrench icon and flashes this code.
If you clicked the wrong error code, return to the Max G30 and G2 Error Code Index.
Previous Error Code: Ninebot Max Error Code 15 - Next Error Code: Ninebot Max Error Code 17
Cause
Error 16 is caused when the **right** brake hall sensor is reporting a value outside of the expected range.
This can be easily replicated by holding down the **right** brake when starting up the scooter.
In the field, this error can be caused by the magnet coming dislodged inside the **right** brake.
The error can also happen if the 049E hall sensor is blown due to a voltage spike or some other issue.
Fix
Check that the **right** brake lever is not stuck by fully pressing it down and then manually pulling it up.
Unscrew the dashboard cover and remove it to confirm that the connector for the **right** brake is still plugged in firmly.
If that does not solve the issue, you may need to disassemble the **right** brake or buy a new one.
The next thing to check is that the magnets within the **right** brake are still in the correct place.
The **right** brake will have to be disassembled to access the magnets.