Ninebot NEE1006-M1: Difference between revisions

← Older edit

Ninebot NEE1006-M1 (view source)

Revision as of 17:32, 27 November 2024

1,615 bytes added , 27 November 2024

→‎Gen 1

Joeybab3

Administrators, Swags, Bureaucrats, Administrators

3,830

edits

@@ Line 1: / Line 1: @@
+The '''Ninebot NEE1006-M1''' is the smaller of the two currently offered removable batteries from Ninebot.
+It is the removable version of the [[Ninebot NEE1006-M]].
+To view other battery models, go to the [[Battery Models|Battery Model Index]].
+[[File:NinebotNEE1006-M1.png|thumb|400px|center|The Ninebot NEE1006-M1 via Segway[https://b2b.segway.com/segway-battery-pack/].]]
+This battery was designed to be the removable equivalent to the batteries used in the [[Ninebot SNSC 2.0|SNSC 2.0]] and [[Ninebot SNSC 2.1|SNSC 2.1]].
+It can be used in removable battery scooters such as the [[Ninebot SNSC 2.2|SNSC 2.2]], [[Ninebot SNSC 2.3|SNSC 2.3]], and [[Ninebot SNSC 2.4|SNSC 2.4]].
+There are other versions of this battery offering more range such as the [[Ninebot NEE1009-W]], [[Ninebot NFCP3628B]], and [[Ninebot NFAF3618A]].
 ==Specs==
-Original specs [https://b2b.segway.com/segway-battery-pack// via Segway].
+Original specs [https://b2b.segway.com/segway-battery-pack/ via Segway].
 {| class="wikitable"
 |+Ninebot NEE1006-M1
 |-
-|Net Weight
+|Dimensions
-|Approx. 54.2 lbs (24.6 kg)
+|423mm×130mm×78mm
 |-
-|Max Speed
+|Weight
-|Approx. 15.5 mph (25 km/h)
+|6kg
 |-
-|Advertised Range
+|Rated Capacity
-|Approx. 37.2 miles (60 km)
+|15.3Ah
 |-
-|Charge Time
+|Rated Power
-|Approx. 4h (5A charger)
+|551Wh
 |-
 |Battery Voltage
@@ Line 28: / Line 41: @@
 |32–104°F (0–40°C)
 |-
-|Battery Capacity
+|Range*
-|551 Wh / 15300 mAh
+|60km
+|-
+|Cells Used
+|EVE / FAR EAST
 |-
-|Motor Power
+|Cell Size
-|350W
+|18650
 |-
-|Suspension
+|Waterproof Rating
-|None
+|IPX7
 |}
+Range*: [[Ninebot SNSC 2.3|Max plus]], 25 degrees c, windless, 75kg weight, 16km/h measured at a consistent speed.
+==BMS Firmware==
+===Gen 1===
+This battery is based on the STM8 family of MCU and is compatible with standard G30 BMS Firmware.
+Inside the case is the same PCB layout as the [[Ninebot NEE1006-M]].
+You can find more info about this firmware by viewing the [https://joeybabcock.me/wiki/Ninebot_Max/G30_Firmware#BMS_Firmware Ninebot Max/G30 STM8 BMS Firmware Index].
+*[[Ninebot Max BMS 1.3.4]]
+*[[Ninebot Max BMS 1.5.3]]
+*[[Ninebot Max BMS 1.5.5]]
+*[[Ninebot Max BMS 1.5.6]]
+*[[Ninebot Max BMS 1.5.8]]
+===Gen 2===
+This generation was released sometime in 2023 and operates on the STM32 series of microcontrollers.
+==Serial Prefixes/Regions==
+*'''6RICV''' - Gen 1 Ninebot NEE1006-M1
+*'''2CHGK''' - Gen 2 Ninebot NEE1006-M1
 [[Category: Scooters]][[Category: Ninebot]][[Category: Battery]]