Okai Error Code 01E: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
(→Cause) |
||
| Line 4: | Line 4: | ||
==Cause== | ==Cause== | ||
Error code 01E indicates that the current has exceeded the safe operating limit. This could be caused by: | |||
* Excessive load: The motor is being overloaded (e.g., trying to climb a steep hill, carrying too much weight). | |||
* Short circuit: There might be a short circuit in the motor windings or in the wiring connected to the motor. | |||
* Faulty controller: The motor controller (ECU) might be malfunctioning, causing it to send an excessive current to the motor. | |||
==Fix== | ==Fix== | ||
[[Category: Scooters]][[Category: Okai]] | [[Category: Scooters]][[Category: Okai]] | ||
Revision as of 19:31, 6 November 2024
"Over current protection. The current exceeds the limit."
If your Okai-Electisan vehicle is beeping or has a red wrench icon and flashes this code, read below.
If you clicked the wrong error code, go back to the Error Code Index.
Next Error Code: Okai Error Code 02E
Cause
Error code 01E indicates that the current has exceeded the safe operating limit. This could be caused by:
- Excessive load: The motor is being overloaded (e.g., trying to climb a steep hill, carrying too much weight).
- Short circuit: There might be a short circuit in the motor windings or in the wiring connected to the motor.
- Faulty controller: The motor controller (ECU) might be malfunctioning, causing it to send an excessive current to the motor.