Okai Error Code 26E: Difference between revisions
Jump to navigation
Jump to search
(Created page with " "The IoT heartbeat fault." {{Okai Error Code SEO|26}} ==Cause== Error code 26E indicates that the IoT (Internet of Things) device is not sending out a regular heartbeat signal to the meter. This could be due to: * Faulty IoT device: The IoT device itself might be malfunctioning, preventing it from sending the heartbeat signal. * Loose connection: The connection between the IoT device and the meter might be loose, interrupting the signal. ==Fix== * Check if the co...") |
(No difference)
|
Latest revision as of 00:23, 31 August 2024
"The IoT heartbeat fault."
If your Okai-Electisan vehicle is beeping or has a red wrench icon and flashes this code, read below.
If you clicked the wrong error code, go back to the Error Code Index.
Previous Error Code: Okai Error Code 25E - Next Error Code: Okai Error Code 27E
Cause
Error code 26E indicates that the IoT (Internet of Things) device is not sending out a regular heartbeat signal to the meter. This could be due to:
- Faulty IoT device: The IoT device itself might be malfunctioning, preventing it from sending the heartbeat signal.
- Loose connection: The connection between the IoT device and the meter might be loose, interrupting the signal.
Fix
- Check if the connection of the IoT is loose.
- Change the IoT.