Okai Error Code 11E: Difference between revisions

Created page with " "Signal transmission problem (controller problem)" {{Okai Error Code SEO|11}} ==Cause== Error code 11E indicates that the throttle sensor is not detecting the throttle in its initial position during the self-test. This could be due to: * Short circuit: The throttle signal wire or the power wire might be shorted to ground or to each other, causing incorrect readings. * Damaged throttle sensor: The throttle sensor itself might be faulty or out of calibration. * Incorr..."
(Created page with " "Signal transmission problem (controller problem)" {{Okai Error Code SEO|11}} ==Cause== Error code 11E indicates that the throttle sensor is not detecting the throttle in its initial position during the self-test. This could be due to: * Short circuit: The throttle signal wire or the power wire might be shorted to ground or to each other, causing incorrect readings. * Damaged throttle sensor: The throttle sensor itself might be faulty or out of calibration. * Incorr...")
(No difference)
Administrators, Swags, Bureaucrats, Administrators
3,830

edits