Wyse 5060 SSD Upgrade: Difference between revisions
Jump to navigation
Jump to search
(Created page with "This page shows how to upgrade the SSD on the Dell Wyse 5060/N07D. ==Procedure== To start, 3 longer screws hold the front cover in place. Use a small Phillips head screwdriver to remove them. thumb|center|400px|The 3 screws to remove. Next slide the front cover off. All screws past this point will be the same going forward. File:DellWyse5060FrontPanelRemoval.jpg|thumb|center|400px|Push down lightly and then slide the front...") |
(No difference)
|
Revision as of 01:35, 31 December 2023
This page shows how to upgrade the SSD on the Dell Wyse 5060/N07D.
Procedure
To start, 3 longer screws hold the front cover in place. Use a small Phillips head screwdriver to remove them.
Next slide the front cover off. All screws past this point will be the same going forward.
Underneath the front panel are 5 screws holding on a structural/protective cover. Remove these and slide the cover in the direction of the arrow etched on the board.
Once the panel is removed, you can unplug the attached speaker to fully remove it or set the panel aside.