Template:Ninebot ESX Reassemble Internals: Difference between revisions
Jump to navigation
Jump to search
(Created page with "Start by placing the plastic battery-ESC clip into the battery. Thread the dashboard cable through the power cable on the battery and then plug in the data line, then the power cable and feed the loose dashboard cable through until tight. Press firmly to reinstall the dashboard cable into the channel. Clip the ESC to the battery.") |
(No difference)
|
Revision as of 01:57, 25 August 2023
Start by placing the plastic battery-ESC clip into the battery.
Thread the dashboard cable through the power cable on the battery and then plug in the data line, then the power cable and feed the loose dashboard cable through until tight.
Press firmly to reinstall the dashboard cable into the channel.
Clip the ESC to the battery.